INSTRUCTIONS - All available as .pdf files for printing
Please review the Tips / Input by Members to find out how others may have done something - especially if you are having difficulty.
Introduction
Fuselage
Revised on Nov 20, 2011 -
Some sequence changes.
Wings
Revised Nov 24th, 2011 -
The two ailerons are now supplied in the short kit-- pre-cut from a 3/8”x4”x36” balsa sheet and shaped to size. The sketch is for reference only.
Wing build clarification
Empennage
Revised Dec 1, 2011 - In the Vertical Fin instruction section, It states : "Cut, fit and pin the 1/4” x 5/8” balsa stick (D) to the plan, to form the trailing edge of the vertical fin that extends down beyond the bottom edge of the vertical fin. The statement should continue: " The 1/4” x 5/8” balsa stick (D) has to be cut to size from the remnant of the 1/4"x1" or from the remnant of the 1/4"x 2" balsa stick supplied with the short kit. The designed size balsa stick was not available at the time of the order.
Items to be supplied by participant |
